雷蒙德闪蒸干燥机-美国ALSTOM公司

雷蒙德®闪蒸干燥机，干燥需要验证的设备，雷蒙德®闪蒸干燥机操作简单，众所周知的高上线的可用性。专为使用精细，从低到中等磨蚀性，非金属，粘，热敏感材料，以及闪光煅烧应用。

雷蒙德®闪存机已处理解决方案，为化工，石油化工，陶瓷，医药，食品，化肥，塑料和世界各地的其他行业。

雷蒙德闪蒸干燥技术

闪蒸干燥是快速去除水分，使水分容易，主要是因为地表水网和微米大小的固体。干燥的湿物料通过输送它在高流速的热空气流。闪蒸干燥设备系统中的停留时间短的产品质量提供了大程度的控制。

雷蒙德®闪蒸干燥系统

一个基本的闪蒸干燥系统的基本组成部分是一个空气加热器，馈线的湿材料的引进，干燥塔，旋风收集器，二次集尘器，排气风机和结缔组织导管工作。

雷蒙德®闪蒸干燥机中所提供自动的温度，压力和电气控制，能够击发天然气，丙烷和/或油的燃烧器系统。

雷蒙德®闪蒸干燥机，也可以与其他的功能，例如粉碎，分离，分类和输送在附加的工艺应用中的使用相结合。

各种安排

气流闪蒸干燥器湿分散的产品设计带来了激烈的高速气流接触。
笼式粉碎机闪蒸干燥器利用与湿，波诡云谲和分散的产品在干燥的表面水分的笼式粉碎机的激动和动荡创建的协助。
进出口穆勒闪蒸干燥器的过程中材料的尺寸缩小时，还需要选择。
闪存分解炉：产品温度较高时，需要提供化学结合水。
闪光冷却器：适当的高温过程时需要冷却的材料运到高架料仓或储物箱。

Raymond® Flash Dryers
Proven Equipment for Your Drying Needs

Raymond® flash dryers are simple to operate and well known for high on-line availability. Designed for use with fine, low to moderately abrasive, non-metallic, sticky, and heat sensitive materials, as well as for flash calcining applications.

Raymond® flash dryers have been providing processing solutions for the chemical, petrochemical, ceramic, pharmaceutical, food, fertilizer, plastic and other industries worldwide.

The Raymond® Flash Drying Process

Flash drying is the rapid removal of moisture from mesh and micron sized solids that give off moisture easily, primarily as surface water. The wet material is dried by conveying it in a high velocity hot air stream. The short retention time in a flash drying system provides for maximum control of product quality.

Raymond® Flash Drying Systems

The essential components of a basic flash drying system are an air heater, feeder for introduction of the wet material, drying column, cyclone collector, secondary dust collector, vent fan and connective duct work.

Raymond® flash dryers are provided with automatic temperature, pressure and electrical controls, with burner systems capable of firing natural gas, propane and/or oil.

Raymond® flash dryers can also be combined with other functions such as pulverizing, separation, classification and conveying for use in additional process applications.

Various Arrangements

Air Stream Flash Dryers: designed to bring wet dispersable products into contact with a heated high velocity gas stream.
Cage Mill Flash Dryers: utilized with wet, lumpy and dispersable products where the agitation and turbulence created by the cage mill assists in drying of surface moisture.
Imp Mill Flash Dryers: selected when size reduction of the process material is also required.
Flash Calciners: provided when higher product temperatures are required to drive off chemically bound water.
Flash Coolers: appropriate when high temperature process materials need to be cooled and transported to an elevated silo or storage bin.